NAVAL - ARCHITECTURE NDT TRAINING IN CHENNAI

 

NDT TRAINING AND CERTIFICATION

 
  1. Ultrasonic Testing
  2. Liquid Penetrant Testing
  3. Magnetic Particle Testing
  4. Radiographic Testing
  5. Radiographic Film Interpretation
  6. Visual Testing
  7. Ultrasonic Thickness Gauging
  8. Ultrasonic Testing of T-K-Y Joints
  9. Eddy Current Testing
 

1. ULTRASONIC TESTING

 

Training & Certification Course in NDT

 
We are providing Level I and Level II Training and Certification as per Recommended Practice SNT - TC-1A 2006 in the following NDT Method.
 
In Ultrasonic Testing high-frequency sound waves, created by a vibrated crystal in probe, are transmitted into a material to detect imperfections or to locate changes in material properties. The most commonly used ultrasonic testing technique is pulse echo, whereby sound is introduced into a test object and reflections (echoes) from internal imperfections or the part's geometrical surfaces are returned to a receiver.
 
This method is very sensitive to detect crack type defects but requires extensive training for operator to interpret the result.
 

Course outline

 

Level I course outline

 
 

Level II course outline

 
 

UT Level 2 Practical Training

 
Same as for Level 1 course + Interpretation, Evaluation of Indications using DAC. Evaluation Methods and Echo Dynamics, Beam Profile and Plotting.

Ultrasonic Thickness Testing

 
To provide a basic knowledge of ultrasonics to enable a participant to carry out thickness gauging tests according to an established procedures. The course is especially designed to provide a sound theoretical knowledge and practical skills for carrying out ultrasonic thickness testing.
 
 

LEVEL II PRACTICAL TRAINING

 
Ultrasonic thickness testing of pipes, tubes, hollow machined components, castings, plates and corroded parts

ULTRASONIC TESTING OF WELDS (TKY JOINTS)

 
This specialized course is presented in a manner that promotes understanding and the ability to conduct T-K-Y Joints Ultrasonic inspection. This is an excellent course for practising engineers to learn in depth concepts of critical weld examinations. This course covers underlying concepts of TKY weld examination of offshore structural fabrication as per API RP 2X and AWS D1.1
 

API-RP 2X (Tubular Connections)

 
 

AWS D 1.1 (Non tubular connection Steel Structures)

 
 
Construction of weld cross section involving curvature using profile e-gauge and other methods.
 
Estimating change of angle, beam-path, surface distance for curved surfaces.
 
Construction of a flaw locating rule for T K Y Weld Inspections.
 
Applying acceptance criteria.
 
Ultrasonic inspection report preparation.
 

PRACTICAL TRAINING

 
Sample Test Specimens containing T, K, Y welded joints on plates and pipes
 

2. LIQUID PENETRANT TESTING

 

Training & Certification Course in NDT

 
The PT course is presented in a manner that promotes understanding and the ability to make immediate application. This is an excellent course for NDT trainees who wants to have Level I and II training in order to qualify for certification as well as facility personnel who are responsible for or oversee the application of Liquid Penetrant Testing
 

Level I course outline

 
 

Level II course outline

 

Review of Level-I Course

 
 

3. MAGNETIC PARTICLE TESTING

 

Training & Certification Course in NDT

 
We are providing Level I and Level II Training and Certification as per Recommended Practice SNT - TC-1A 2006 in the following NDT Method
Surface and near-surface flaws produce magnetic poles or distort the magnetic field in such a way that the iron particles are attracted and concentrated. This produces a visible indication of defect on the surface of the material. Therefore, the method is most applicable for detecting the surface or sub-surface defects.MT can be applied in various types depending on the applications required. It could be wet, powder or fluorescent.
 

Level I course outline

 
 

UT Level 1 Practical Trainingg

 
Complete calibration of ultrasonic flaw detection equipment for various types of transducers, Discontinuity Detection Locating the flaw and Size Estimation Techniques
 

Level II course outline

 
 

MT Level 2 Practical Training

 
Same as Level-I + Interpretation, evaluation and recording of test results
 

4. RADIOGRAPHIC TESTING

Training & Certification Course in NDT

We are providing Level I and Level II Training and Certification as per Recommended Practice SNT - TC-1A 2006 in the following NDT Method

RT involves the use of penetrating gamma- or X-radiation to examine materials and product's defects and internal features. An X-ray machine or radioactive isotope is used as a source of radiation. Radiation is directed through a part and onto film or other media. The resulting shadowgraph shows the internal features and soundness of the part. Material thickness and density changes are indicated as lighter or darker areas on the film. The darker areas in the radiograph below represent internal voids in the component. RT is a common method to be used in general metal fabrication and construction. However, there are some limitations of the methods:

Level I course outline

RT Level 1 Practical Training

Radiography of Castings and welds using X-ray and Gamma ray

Level II course outline

Review of Level-I

RT Level 2 Practical Training

Same as level-I + Interpretation, evaluation of Radiographs, recording of test results and preparation of test reports

 

5. RADIOGRAPHIC FILM INTERPRETATION

 
Understand the basic principles of the radiographic inspection procedure, understand the radiographic film processing, procedures, recognize limitations in exposure quality and understand potential causes of processing artifacts
Assess radiographic quality and understand viewing condition requirements; Interpret radiographic codes and specifications and write reports based on code requirements;
 
Understand origins of defects and locate and recognize radiographic images of defects with a high probability of detection
 
 

Level II Practical Training

 
Calibrating and using densitometers, evaluating radiographs related to casting and welds
 

Radiographic Testing

 

Training & Certification Course in NDT

 
We are providing Level I and Level II Training and Certification as per Recommended Practice SNT - TC-1A 2006 in the following NDT Method
RT involves the use of penetrating gamma- or X-radiation to examine materials and product's defects and internal features. An X-ray machine or radioactive isotope is used as a source of radiation. Radiation is directed through a part and onto film or other media. The resulting shadowgraph shows the internal features and soundness of the part. Material thickness and density changes are indicated as lighter or darker areas on the film. The darker areas in the radiograph below represent internal voids in the component. RT is a common method to be used in general metal fabrication and construction. However, there are some limitations of the methods:
 
 

Level I course outline

 
 

RT Level 1 Practical Training

 
Radiography of Castings and welds using X-ray and Gamma ray
 

Level II course outline

 
Review of Level-I
 

RT Level 2 Practical Training

 
Same as level-I + Interpretation, evaluation of Radiographs, recording of test results and preparation of test reports
 

6.VISUAL TESTING

 

Training & Certification Course in NDT

 
We are providing Level I and Level II Training and Certification as per Recommended Practice SNT - TC-1A 2006 in the following NDT Method
 
Visual Examination is generally used to determine such things as the surface condition of the part, reinforcement and undercutting of welds, alignment of mating surfaces, shape or evidence of leaking. Methods employed may be either:
 
 

Course outline